Canon CONSOLE Image Control & Storage Software v1.1 Manual
Recording onto the Hard Disk
5-45
Recording a Movie File
By Operating the Camcorder
By Operating CONSOLE
1
Press the start/stop button on the camcorder.
• Recording starts on both the tape in the camcorder and the hard disk.
• When XL2 is connected to the computer and other IEEE1394 device is also connected at
• When XL2 is connected to the computer and other IEEE1394 device is also connected at
the same time, the hard disc recording will not be started even if you press the camcorder’s
start/stop button.
start/stop button.
• When [Save custom preset file when recording start.] is selected in the [General] tab setting,
the Custom Preset file will be saved in the same folder as the video folder. The name of the
Custom Preset file is the same as the recording file name.
Custom Preset file is the same as the recording file name.
• [
] appears on the camcorder screen.
• When no tape is inserted, or the tape is write-protected, recording is saved only on the hard
disk.
• Even when the tape reaches the end, recording onto the hard disk continues.
• To stop recording, press the start/stop button on the camcorder again.
• To stop recording, press the start/stop button on the camcorder again.
1
Click
in the [Camera Control]
window.
To stop recording, click
.
When the frame rate was changed during recording, recording stops, and a new file will be
created when recording is resumed.
created when recording is resumed.
When using a laptop computer, the recording will not stop even if the display is closed.
• Recording starts on both the tape in the camcorder and the hard disk.
• When [Save custom preset file when recording start.] is selected in the [General] tab setting,
• When [Save custom preset file when recording start.] is selected in the [General] tab setting,
the Custom Preset file will be saved in the same folder as the video folder. The name of the
Custom Preset file is the same as the recording file name.
Custom Preset file is the same as the recording file name.
•
changes to
, and the recording indicator in the [Rec Viewer] window
starts rotating.
• When no tape is inserted, or the tape is write-protected, recording is saved only on the hard
disk.
• Even when the tape reaches the end, recording onto the hard disk continues. When you
restart the recording by pressing the camcorder’s start/stop button after changing the tape,
the camcorder will start to record on the tape, and CONSOLE will keep recording onto the
hard disk.
the camcorder will start to record on the tape, and CONSOLE will keep recording onto the
hard disk.
• When recording in HDV standard on the tape and hard disk, a new file will be created after
changing the tape when you restart the recording by pressing the camcorder’s Start/Stop
button. The computer stops the recording and restarts recording onto the new file.
button. The computer stops the recording and restarts recording onto the new file.
• To record the next scene as another file in [Sequence] or [Frame] mode, finalize the file by
clicking
while recording or when recording is stopped.