Canon REALiS 4K500ST Pro AV Manual

122

Connecting the projector to a network enables you to control the projector from a 
computer and receive notification of projector errors via email. 
Depending on the method of network connection, preparation on the computer side 
may be necessary. The following is an explanation of preparation on the computer 
side.

To connect the projector to a computer network, use a LAN cable.

• When the [Network function] setting of the projector is set to [Off] (Network 

Connections is disabled), switch it to [On] to enable it. (

• Referring to “Checking Projector Information” (

), check that the projector IP 

address does not overlap with other computers that are on the same LAN. To set 
a projector IP address, follow the instructions in “Completing Computer Settings 
for a Network Connection” (

) and use the web screen, or use projector TCP/

IP settings. (

• When you connect the computer to the network for the first time, it is also 

necessary to perform settings on the computer. In this case, consult the network 
administrator regarding the necessary settings.

In a network environment where a DHCP server is operating, choose [On] on the 
projector [DHCP] screen to enable the DHCP function and connect it. (

)

LAN cable (shielded twisted pair; 

not included)

Hub or router, etc.

LAN port