Canon LE-5W BK Manual De Instruções

Projecting

28

If the projector is turned on for the first time, select the language for the On-Screen 
Display (OSD).

1.

Press the HOME button on the remote control to open the home screen.

2.

Press the   button on the remote control, select Setup, and then press the OK 
button. The Setup menu opens.

3.

Press the 

 button on the remote control, select Language from the menu, and 

then press the OK button.

4.

Press the  , 

, 

, and   buttons on the 

remote control to select your language, and 
then press the OK button.

* You can select from 19 languages. See page 

 

for details.

Perform one of the following operations to switch the input signal. 

•  Press one of the input signal buttons (PC, HDMI, or VIDEO) on the remote control.

* There are no other input signals buttons aside from PC, HDMI, and VIDEO. Press 

the PC button to display images from component video devices.

• Press 

the 

INPUT button on the projector's control panel. Each time you press the 

button, the input signal changes in the order: PC/Component, HDMI, VIDEO.

•  Select the input signal icon on the home screen, and then press the OK button.

* You then need to perform further menu operations for Internal Memory (

), USB 

Drive (

), SD Card (

), and USB Streaming (

). Refer to each corresponding 

section in this manual.