Canon LE-5W BK Manual De Instruções

Menu function settings

82

MENU > Keystone 

This function allows you to correct keystone 
distortions.

Use this if you cannot correct the distortion 
using Auto Keystone.

Press the 

/  buttons to adjust the values.

When you have finished making adjustments, 
press the MENU button or the BACK button.

 

•  Keystone can be adjusted within ± 40 

degrees.*1

•  If you perform manual keystone 

adjustment, the auto keystone function is 
disabled until the next time the projector is 
started. However, you can enable auto 
keystone again by setting Auto Keystone 
to Off, and then setting it back to On.

* 1 When projecting an input signal with 3D 

timing, the keystone can only be adjusted 
within ± 4 degrees.

MENU > LED Mode  

This function allows you to adjust the 
brightness of the LED light source.

By changing the LED mode, you can reduce 
the amount of electricity consumed and the 
noise.

Select the LED Mode with the OK button, 
press the  /

 buttons to select the content, 

and then press the OK button to confirm your 
selection.

Press the MENU button or the BACK button.

 

• The 

default 

is 

Normal.

•  The setting is saved even if you turn off the 

projector.

Projects at standard 
brightness.

Reduces the brightness of the 
LED, and therefore the 
amount of electricity 
consumed as well as the fan 
noise.