Canon XH A1 Manual De Instruções
31
E
Re
co
rd
co
rd
in
g
Selecting the Signal Standard and Aspect
Ratio
You can select the signal standard of your recording (high definition or standard definition) and, for
standard definition recordings, also the aspect ratio of the recording. Since the displays on the
camcorder have an aspect ratio of 16:9, when you select [SD4:3] the picture will appear in the center of
the screen with black sidebars.
standard definition recordings, also the aspect ratio of the recording. Since the displays on the
camcorder have an aspect ratio of 16:9, when you select [SD4:3] the picture will appear in the center of
the screen with black sidebars.
Open the menu and select [SIGNAL SETUP]. Select [SIGNAL STD], select a setting
option and select [YES] to confirm the selection and close the menu.
option and select [YES] to confirm the selection and close the menu.
• [HD]: To record on the tape in HDV standard or to use the camcorder as a high-definition (HD) camera.
• [SD16:9], [SD4:3]: To record on the tape in DV standard or to use the camcorder as a standard-definition
• [SD16:9], [SD4:3]: To record on the tape in DV standard or to use the camcorder as a standard-definition
(SD) camera. Select the aspect ratio as desired.
To play back recordings made with a 16:9 aspect ratio change the settings of the TV as necessary
(refer to the instruction manual of the connected TV). To play back widescreen recordings on a TV set
with 4:3 aspect ratio, change the [LETTERBOX] setting accordingly (
(refer to the instruction manual of the connected TV). To play back widescreen recordings on a TV set
with 4:3 aspect ratio, change the [LETTERBOX] setting accordingly (
99). TV sets equipped with
the ID-1 system will switch automatically to a widescreen (16:9) display.