Canon REALiS WUX5000 Pro AV Manual

194

Securely insert the air filter all the way 
into the projector.

The air filter protects the lens and mirror inside the projector from dust and dirt. Should 
the air filter become clogged with dust, the projector may be damaged since it will block 
the air flow into the projector and raise the internal temperature of the projector. The fol-
lowing screen is displayed when turning on the projector if the air filter needs to be 
cleaned (after approx. 300 hours). Clean the air filter if it is displayed.

• Turn the power of the projector off and pull out the power plug.
• Hook your finger into the air filter handle on the side of the projector, and remove the air 

filter. Then use a vacuum cleaner to remove the dust.

• If the filter replacement screen is displayed when turning on the projector after cleaning 

the air filter, select [Yes] and press 

OK. The filter replacement screen will disappear.

• This screen is not displayed when [Filter warning display] is set to [Off]. (WX6000 / 

SX6000) (

• Handle the air filter carefully. If damaged, the air filter will not work properly.
• When the lamp is replaced, it is recommend that you also replace the air filter.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part No.: RS-FL01
• This can also be purchased from the Canon home page

• Only the [ ], [ ],

 OK and POWER buttons are 

available while this screen is displayed. (When you 
press the 

POWER button, the message “Push 

POWER button again to turn off power” appears.)

• When this screen has disappeared after being dis-

played for 10 seconds, all buttons become opera-
ble.