Canon EOS D60 Manual De Instruções

76

When taking pictures of large groups or landscapes, the EOS D60 can automatically achieve a
sharp focus over a wide depth of field. All the subjects covered by the AF points, from those
close to the camera to those far away from the camera, can be taken clearly.

●

In <

> mode, the shutter speed and aperture value cannot be changed freely. If the

camera selects a slow shutter speed, the use of a tripod is recommended.

●

Automatic depth-of-field AE cannot be used if the lens’ focus mode switch is set to <MF >
(or < M > on older lenses). Set the switch to < AF >.

∗

 stands for Auto-Depth of field.

●

Place an AF point over the subject and
press the shutter button down halfway. (

4

)

●

The focus will be sharp between the
subjects where the AF points flashes in red.

●

You can check the depth of field beforehand
while the exposure is displayed. (

→73)

●

In the example shown on the left, sharp
focus will be attained between the left-most
person and right-most person.

●

If the aperture value is not blinking, the
exposure is correct.

●

Press the shutter button down fully.

If the aperture value is blinking, the exposure level is correct but the desired depth
of field cannot be achieved. Either use a wide-angle lens or move farther from the
subject.

●

Regardless of the AF mode setting, ONE-SHOT AF will take effect.

●

If you use a flash, the result will be the same as using < > (Program AE) mode
with flash.