Canon EOS-1D Mark II N Manual De Instruções
22
To charge the Ni-MH Pack NP-E3, connect it to Ni-MH Charger NC-E2.
1
Connect the power cord.
Connect the AC plug to a power
outlet and connect the power cord to
the charger.
outlet and connect the power cord to
the charger.
X
The <POWER> lamp will light.
2
Detach the protective cover and
connect the battery.
connect the battery.
Connect the charger’s charge/
discharge plug to the battery’s socket.
discharge plug to the battery’s socket.
Attach the cover to the battery
compartment cap and store it.
compartment cap and store it.
3
Recharge the battery.
X
When you connect the battery, the
recharging will start automatically and
the red <CHARGE> lamp will light.
recharging will start automatically and
the red <CHARGE> lamp will light.
It takes about 120 minutes to fully
recharge a completely exhausted
battery.
recharge a completely exhausted
battery.
When the battery is fully charged, the
<CHARGE> lamp will blink quickly
(twice per sec.).
<CHARGE> lamp will blink quickly
(twice per sec.).
After recharging the battery,
disconnect it and unplug the power
cord from the power outlet.
disconnect it and unplug the power
cord from the power outlet.
Recharging the Battery
CHARGE Lamp A (red)
POWER Lamp
CHARGE Lamp B (red)
REFRESH (discharge)
Lamp B (orange)
Lamp B (orange)
REFRESH (discharge) Button
REFRESH (discharge)
Lamp A (orange)