Canon EOS-1D Mark II N Manual De Instruções
47
The date/time (back-up) battery’s service life is about 5 years. If the
date/time is reset when the battery is replaced, replace the back-up
battery with a new CR2025 lithium battery as described below.
date/time is reset when the battery is replaced, replace the back-up
battery with a new CR2025 lithium battery as described below.
1
Set the <
4
> switch to <
2
>
and remove the battery pack.
The back-up battery is on the ceiling
of the battery compartment.
of the battery compartment.
2
Remove the back-up battery
cover.
cover.
Use a small Philips screwdriver.
As shown in the diagram, loosen the
screw to remove the cover.
screw to remove the cover.
Be careful not to lose the screw.
3
Remove the battery.
4
Install a new back-up battery.
The plus side of the battery must face
up.
up.
5
Attach the cover.
Install the battery and turn the <
4
>
switch to <
1
>. The date/time will be
displayed on the LCD monitor. Set
the date/time.
the date/time.
Replacing the Date/Time Battery
(+)