Canon EOS-1D Mark II N Manual De Instruções
78
For long exposures 1 sec. or longer, noise reduction can be applied.
1
Select [Noise reduction].
Select the <z> tab.
Hold down the <X> button and
turn the <5> dial to select [Noise
reduction]. Then let go of the button.
turn the <5> dial to select [Noise
reduction]. Then let go of the button.
2
Select the desired setting.
Hold down the <X> button and
turn the <5> dial to select the
desired setting. Then let go of the
button.
turn the <5> dial to select the
desired setting. Then let go of the
button.
3
Noise Reduction of Long Exposures
Off
Noise reduction is not applied.
Auto
Noise reduction is applied
automatically on long exposures 1
sec. or longer if noise typical to
long exposures is detected. This
setting is effective in most cases.
sec. or longer if noise typical to
long exposures is detected. This
setting is effective in most cases.
On
Noise reduction is applied
automatically to all long
exposures 1 sec. or longer. This
setting is effective for noise that
cannot be detected or reduced
with the [Auto] setting.
exposures 1 sec. or longer. This
setting is effective for noise that
cannot be detected or reduced
with the [Auto] setting.
At the [Auto] or [On] setting, the maximum burst during continuous shooting
will be slightly lower.
will be slightly lower.
The noise reduction process may require the same amount of time as the
exposure. As long as the viewfinder display indicates the maximum burst as
1 or higher, shooting can continue.
exposure. As long as the viewfinder display indicates the maximum burst as
1 or higher, shooting can continue.