Canon EOS-1D Mark II N Manual De Instruções
92
1
Select the self-timer mode.
Hold down the <
W
> and
<
Q
> buttons and turn the <
6
>
dial to select the desired self-timer
mode. Then let go of the buttons.
mode. Then let go of the buttons.
2
Focus the subject.
Look in the viewfinder and press the
shutter button halfway to check that
the focus confirmation light is on and
the exposure setting is displayed.
shutter button halfway to check that
the focus confirmation light is on and
the exposure setting is displayed.
3
Take the picture.
Press the shutter button completely.
X
The self-timer lamp will start blinking
to indicate that it is counting down.
The lamp’s blinking will become
faster two seconds before the picture
is taken.
to indicate that it is counting down.
The lamp’s blinking will become
faster two seconds before the picture
is taken.
Self-timer Operation
k
: 10-sec. self-
timer
l
: 2-sec. self-
timer
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
start the self-timer. Doing so will throw off the focus.
Use a tripod when you use the self-timer.
Before starting the self-timer, look through the viewfinder or cover it with
the eyepiece shutter (p.111).
the eyepiece shutter (p.111).
To cancel the self-timer after it starts, set the <
4
> switch to <
2
>.
When using the self-timer to shoot only yourself, use focus lock (p.81) for
an object at about the same distance as where you will be.
an object at about the same distance as where you will be.
The 2-second self-timer is effective for close-ups or photo duplicating
work to prevent camera shake (camera movement while the shutter
button is pressed).
work to prevent camera shake (camera movement while the shutter
button is pressed).