Canon imagePROGRAF iPF5100 Manual
Messages regarding printheads
Messages regarding printheads
Online Key / and recalibrate
Band Adj Error / Please Readjust
Cause
Corrective Action
The feed amount cannot be adjusted; highly
transparent lm is loaded.
transparent lm is loaded.
Adjust the feed amount manually.
(→P.619)
(→P.619)
Printhd Adj Err / Please Readjust
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.651)
(→P.651)
2.
Clean the Printhead if the nozzles are clogged.
(→P.652)
(→P.652)
The Printhead cannot be aligned; highly transparent
lm is loaded.
lm is loaded.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.610)
use, other than lm, for Printhead adjustment.
(→P.610)
Printhead x / Check Nozzles (x is Left or Right)
Cause
Corrective Action
If printing is faint, clean the Printhead.
If “Left Printhead” is displayed, clean the Printhead L
; if “Right Printhead” is displayed, clean the Printhead
R .
(→P.652)
If “Left Printhead” is displayed, clean the Printhead L
; if “Right Printhead” is displayed, clean the Printhead
R .
(→P.652)
The printhead nozzles may be clogged.
Press the Online button to continue with printing.
However, note that this error may affect the printing
quality.
To cancel printing, press the Stop/Eject button.
However, note that this error may affect the printing
quality.
To cancel printing, press the Stop/Eject button.
756 Error Message