Canon imagePROGRAF iPF5100 Manual
Printer Specications
Printer Specications
Specications
Important
•
This information is subject to change as the printer is updated.
•
The following values may vary depending on the operating environment.
Printer
Power supply
100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation
100 W max.
Sleep mode
100-120 V: 5 W max.
(8 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(9 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
(8 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V: 6 W max.
(9 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Off
1 W max. (*1)
Operating noise
Approx. 51 dB (A) max.
Temperature
15-30°C (59-86°F)
Operating
environment
environment
Humidity
10-80%, non-condensing
Dimensions (W × D × H)
999×810×344 mm (39.3×31.9×13.5 in)
Weight
(not including the Printhead and Ink Tank )
(not including the Printhead and Ink Tank )
49 kg (108.0 lb)
Space required for installation (*2)
1,299×1,910×644 mm (51.1×75.2×25.4 in)
Applicable standards
International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,
turn off the printer and unplug the power cord.
*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300
mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only
when printing from the Front Paper Feed Slot, leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
when printing from the Front Paper Feed Slot, leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
72 Printer Parts