Canon XF305 Manual
Customization
124
4
Custom Picture Settings
Available Custom Picture Settings
The following are the available settings. Even if no custom picture file is
selected, the default settings are still applied to the picture.
selected, the default settings are still applied to the picture.
Gamma
The gamma curve changes the overall look of the image. (Default:
[Normal 1]).
[Normal 1]).
[Normal 1] to [Normal 4]: These settings are suitable for viewing the image
on a TV monitor. Highlights in [Normal 2] are
brighter than those of [Normal 1]. Dark tones in
the lower part of the gamma curve for [Normal
3] (ITU-R BT.709 standard) and [Normal 4] are
more pronounced than those of [Normal 2].
brighter than those of [Normal 1]. Dark tones in
the lower part of the gamma curve for [Normal
3] (ITU-R BT.709 standard) and [Normal 4] are
more pronounced than those of [Normal 2].
[Cine 1] or [Cine 2]:
Use [Cine 1] for a gamma curve that results in a
picture with a cinema-like feel and cinema-like
tones. [Cine 2] has softer contrasts than does
[Cine 1] but is also suitable for creating a
cinema-like picture.
picture with a cinema-like feel and cinema-like
tones. [Cine 2] has softer contrasts than does
[Cine 1] but is also suitable for creating a
cinema-like picture.
[Wide DR]:
Applies a gamma curve with a very wide
dynamic range, optimized for playback on an
HDTV.
dynamic range, optimized for playback on an
HDTV.
[Hlt.Pri.]:
Use Highlight Priority to obtain a natural
gradation in tones and reduce overexposure in
the bright areas of the picture (0 130).
gradation in tones and reduce overexposure in
the bright areas of the picture (0 130).
Black
Controls the black level and color cast of blacks.
Master Pedestal
The master pedestal increases or decreases the black level. Higher
settings will make dark areas brighter but decrease contrast. This
setting can be adjusted from -50 to 50. (Default: 0)
settings will make dark areas brighter but decrease contrast. This
setting can be adjusted from -50 to 50. (Default: 0)
Normal 1
Cine 1
Cine 2
Cine 1
Cine 2
Normal 4
Normal 2/3/4
Normal 3
Normal 1/2
Normal 1
Hlt.Pri.
Wide DR
Input
Ou
tpu
t
Gamma
Input
Out
p
ut