Canon XF305 Manual

Playback

140

5

Playback

Adjusting the Volume

During playback, audio will come from the monaural built-in speaker or 
headphones. When you connect headphones to the W (headphone) 
terminal, the built-in speaker will be muted.

Adjusting the Headphone Volume

Press the HEADPHONE +/- buttons to adjust the volume.

Adjusting the Built-in Speaker Volume

1 Open the [Speaker Volume] submenu.

[m Audio Setup] 

 [Audio Output] 

 [Speaker Volume]

2 Select the desired level and then press SET.

• Select [Off] to mute the audio.

NOTES

• For details on changing the audio channel, refer to Selecting the Audio 

Channel (0 157).

Adding Shot Marks during Playback

You can add an c mark, d mark or both marks to a clip during playback 
or playback pause. You can add either mark using assignable buttons or 
an c mark using the wireless controller’s SHOT1 button.

1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] 

(0 117).

2 During playback or playback pause, press the assignable button 

at the point in the clip to add the shot mark.

• A message indicating the shot mark appears on the screen and the 

shot mark is added to the clip.

• Adding a shot mark to a clip during playback will pause the playback.

• Up to 100 shot marks (c and d marks combined) can be added to 

a single clip.

• There may be up to a 0.5 second delay from when you press the 

button to when the camcorder adds the shot mark.

[m Audio Setup]

[Audio Output]

[Speaker Volume]

[8]