Canon Wireless File Transmitter WFT-E7A Manual
Installing and Removing the Battery
12
The remaining battery level is displayed when you turn the transmitter on. A blinking battery
icon (
icon (
) indicates that the battery will be depleted soon.
Number of images that can be transferred
Approx. number of images
When using a fully charged LP-E6N.
When automatic transfer is performed during shooting of an image of approx. 5 MB under
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
Fewer images can be transferred when transferring images continuously over a wireless
LAN.
LAN.
1
Open the cover.
Push the lever down and open the cover.
2
Remove the battery.
Press the battery lock lever in the direction of the
arrow to unlock, and then remove the battery.
arrow to unlock, and then remove the battery.
To prevent a short-circuit, be sure to always attach
the protective cover to the battery.
the protective cover to the battery.
Battery check
Icon
Level (%)
100 – 70
69 – 50
49 – 20
19 – 10
9 – 1
0
LAN
At Normal Temperature (23°C / 73°F)
At Low Temperature (0°C / 32°F)
Wireless LAN
2400
2300
Wired LAN
2200
2200
Removing the battery