Canon Wireless File Transmitter WFT-E7A Manual
28
Configuring Network Settings
The following instructions are for setting screens that vary depending on the communication
method (FTP Transfer, EOS Utility, WFT Server, or Media Server), as shown below. Read the
page that describes the selected communication method.
method (FTP Transfer, EOS Utility, WFT Server, or Media Server), as shown below. Read the
page that describes the selected communication method.
FTP trans.
Chapter 2 (p.31)
EOSUtility
Chapter 3 (p.47)
WFTserver
Chapter 4 (p.53)
MediaServ.
Chapter 5 (p.65)
Completing Settings for the Communication Method
Users of EOS Utility Ver. 2.13 or Earlier in Windows
Before performing the operations described from page 47, perform the operations below. If these
operations are not performed, the Pairing Software described on page 48 may not start.
Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this
order), and then double-click the [WFT FirewallSettings] icon. (This folder name is only an example.
The folder where files are saved varies depending on the computer environment used.)
After performing this operation, perform the operations described from page 47.
Before performing the operations described from page 47, perform the operations below. If these
operations are not performed, the Pairing Software described on page 48 may not start.
Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this
order), and then double-click the [WFT FirewallSettings] icon. (This folder name is only an example.
The folder where files are saved varies depending on the computer environment used.)
After performing this operation, perform the operations described from page 47.