ASUS Z87-PRO Manual Do Utilizador

17

Wi-Fi GO! & NFC Remote allows you to remotely control your computer using your smart 

device.

1.

On your smart device, turn on the Wi-Fi connection. Ensure that your smart device is 

within the same network as your computer.

2.

Tap 

Wi-Fi GO! 

& NFC Remote

 > Enter, then tap the computer you want to connect with your smart 

device.

3.

Tap OK on the confirmation message.

If you want to wake up your computer using the smart device, ensure that you enable the 

computer’s Wake-on-LAN settings. To configure your computer’s Wake-on-LAN settings:
1. 

From BIOS Setup, go to Advanced > APM then set Power On By PCIE/PCI item to 

[Enabled].

2. 

From Windows

®

 OS, do the following:

a.  On your desktop, click Start, right-click Computer > Manage to launch the 

Computer Management screen.

b.  Click Device Manager to view all the installed devices.
c.  Click Network Adapters, right-click the installed module card (Broadcom or 

Atheros) then click Properties > Power Management tab.

d.  Tick these items Allow this device to wake up the computer and Only allow a 

magic packet to wake the computer.

For 802.11ac standard Wi-Fi GO! Card, the Wake-on-LAN function will be supported in the 

later version for Windows

®

 8 operating system.