ASUS Q87M-E Manual Do Utilizador

Página de 77
1-10
Chapter 1: Product introduction
1.5.3 
PCI slots
The PCI slots support LAN cards, SCSI cards, USB cards, and other cards that comply with 
PCI specifications. 
1.5.4 
PCI Express 3.0/2.0 x16 slots
This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that 
comply with the PCI Express specifications.
1.6 
Jumpers
1. 
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can 
clear the CMOS memory of date, time, and system setup parameters by erasing 
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in 
CMOS, which include system setup information such as system passwords.
To erase the RTC RAM:
1.  Turn OFF the computer and unplug the power cord.
2.  Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 
for about 5-10 seconds, then move the cap back to pins 1-2.
3.  Plug the power cord and turn ON the computer.
4.  Hold down the <Del> key during the boot process and enter BIOS setup to re-
enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default 
position. Removing the cap will cause system boot failure!
IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
Intel PCH SATA controller #0
– shared
Intel PCH SATA controller #1
– shared
Realtek 8111F controller
shared –
Q87M-E
Q87M-E Clear RTC RAM
1 2
2 3
Normal
(Default)
Clear RTC
CLRTC