Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ASUS
  4. P8H77-M
  5. Manual Do Utilizador

ASUS P8H77-M Manual Do Utilizador

Download
Página de 96
2-19
ASUS P8H77-M
Intel
®
 Smart Connect Technology [Disabled]
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options: [Enabled] [Disabled]
2.5.3 
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The 
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA 
port.
SATA Mode Selection [IDE]
Allows you to set the SATA configuration.
[IDE] 
 Set to [IDE] when you want to use the Serial ATA hard disk drives as 
Parallel ATA physical storage devices.
[AHCI] 
 Set to [AHCI] when you want the SATA hard disk drives to use the AHCI 
(Advanced Host Controller Interface). The AHCI allows the onboard storage 
driver to enable advanced Serial ATA features that increases storage 
performance on random workloads by allowing the drive to internally 
optimize the order of commands.
[RAID] 
 Set to [RAID] when you want to create a RAID configuration from the SATA 
hard disk drives.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When 
read/write of your hard disk errors occur, this feature allows the hard disk to report warning 
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] or [RAID] 
and allows you to enable or disable the hot-plug support for each SATA port. Configuration 
options: [Enabled] [Disabled]
2.5.4 
System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] 
Allow you to enable remapping the memory above 4GB.
[Disabled] 
Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration 
options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU. 
Configuration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use 
when idle. Configuration options: [Disabled] [Enabled]