ASUS N3050I-CM-A Manual Do Utilizador

ASUS N3050I-CM-A

1-9

This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline

Memory Module (SO-DIMM) sockets. The figure illustrates the location of the DDR3 DIMM

sockets:

Channel A

DIMM_A1

Channel B

DIMM_B1

•

You may install varying memory sizes in Channel A and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel configuration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

•

Always install the DIMMS with the same CAS Latency. For an optimum compatibility,

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

•

Always install a DIMM into the DIMM_A1 slot for the motherboard to work properly.

•

This motherboard supports 1.35V DDR3L and 1.5V DDR3 DIMMs.

•

Due to the memory address limitation on 32-bit Windows

®

OS, when you install 4GB

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

-

Use a maximum of 3 GB system memory if you are using a 32-bit Windows

®

OS.

-

Install a 64-bit Windows

®

OS if you want to install 4GB or more on the

motherboard.

-

For more details, refer to the Microsoft

®

support site at http://support.microsoft.

com/kb/929605/en-us.

Visit the ASUS website at www.asus.com for the latest QVL.

DIMM_B1

DIMM_A1