SwissVoice Eurit 748 20404911 Manual Do Utilizador

Códigos do produto
20404911
Página de 80
30
20404916en_ba_b0
Telephoning
Internal enquiry call 
You are conducting an external call and want to call an internal party without ending 
the external call.
1. Press 
Int
.
2. Dial the desired handset number and press OK to confirm. The external call is put on hold.
If the second handset answers, you can talk to the internal call partner without the 
external caller hearing you.
You can switch between the two call parties or connect all three calls into a 3-party-
conference. Refer to chapter “Brokering” and “Conference calls“ for more details.
Note 
• You cannot use the 
Int
key if the call duration is not displayed.
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under END.
• Internal enquiries are managed by the base station and are not dependent
on your network operator’s available services.
Brokering (switching between two calls)
You have two active calls (1 internal and 1 external), one of which is on hold. 
1. Press the key 
Int
or the softkey under OPTIONSBROKERING to switch between 
the call partners. Press the softkey under OPTIONSCONFERENCE to connect all three
call partners with each other.
2. Press 
to end one of the calls. The remaining call partners are automatically
connected with each other.
Note
Brokering between two external call partners is managed by the public 
telephone network and is therefore dependent on your network operator’s 
available services (network functions). Find out whether these network 
functions are supported.