SwissVoice Eurit 748 20404911 Manual Do Utilizador

44

20404916en_ba_b0

Network functions

Please note that the services in this chapter are supplementary network services and thus
subject to availability from your network operator.

To activate certain network functions, you have to send special codes to the network.

Often these codes contain special characters such as

or 

. In some cases, 

the so-called flash signal is required. You can enter this by pressing key 

. 

Contact your network operator for details and the appropriate codes to activate these
services.

Procedure:

1. Press the softkey under MENU. Press 

to scroll to 

NET FUNCTIONS

and press OK

to confirm.

2. Scroll to the relevant submenu and make the relevant settings:

Call forwarding allows callers to reach you even if you are not near your own telephone. 

Choose the relevant type of call forwarding (unconditional, no reply, busy) in the submenu 

SWITCH ON

or 

SWITCH OFF

and enter the forwarding number (i.e. the number to which

calls are to be forwarded).

Incoming calls are forwarded immediately.

Incoming calls are forwarded after a delay (fixed time or number of rings).

Calls are forwarded if the line is busy.

Once you have defined the call forwarding option, enter the forwarding number (i.e. the
number to which calls are to be forwarded). 

At any time you can: • check the call forwarding status

• edit or delete the forwarding number

• deactivate call forwarding.