SwissVoice Eurit 748 20404911 Manual Do Utilizador
![SwissVoice](https://files.manualsbrain.com/attachments/bc8c3429c28ed04fc7dd2a4630334b0b92b01d9d/common/fit/150/50/af8274e3d34754453e7352eb4527a06796d016198f6b7843f7d9968b6dc9/brand_logo.gif)
Códigos do produto
20404911
68
20404916en_ba_b0
PBX access
Compatibility
You can also connect your telephone to an ISDN private branch exchange. The functionality
is dependent on your PBX type. Contact your network operator for further information.
is dependent on your PBX type. Contact your network operator for further information.
Access Code
You may need to enter an access code (e.g. 0) to allow the public exchange to assign an
external line for external calls or for calling back numbers in the calls list.
external line for external calls or for calling back numbers in the calls list.
Entering the Access Code
Procedure:
1. Press the softkey under MENU. Scroll to
PBX
in the
SETTINGS
menu and press OK to
confirm.
2. Enter the access code.
Note
• After having programmed an access code you do not have to enter it again
in a directory entry. However, if you dial off-hook or in call preparation you
still have to enter the access code manually.
still have to enter the access code manually.
• To give the exchange sufficient time to assign a public line, you may
need to program a “pause” after the access code by pressing and holding
down .
down .
• For further information, refer to your PBX operating instructions.
Incoming Code on/off
Some exchanges automatically insert the access code. Make the necessary setting (on or
off) in the menu
off) in the menu
SETTINGS
,
PBX
,
FUNCTIONS
.
0