ASUS DSL-N16 Guia De Configuração Rápida

41

•  Set AP isolated:  The Set AP isolated item prevents wireless 

devices on your network from communicating with each 

other. This feature is useful if many guests frequently join or 

leave your network. Select Yes to enable this feature or select 

No to disable.

•  Enable IGMP Snooping:  Select Enable as the default value 

to help improve the speed of transmission.

•  Multicast rate (Mbps):  Select the multicast transmission 

rate or click Disable to switch off simultaneous single 

transmission.

•  RTS Threshold:  Select a lower value for RTS (Request to 

Send) Threshold to improve wireless communication in a 

busy or noisy wireless network with high network traffic and 

numerous wireless devices.

•  DTIM Interval:  DTIM (Delivery Traffic Indication Message) 

Interval or Data Beacon Rate is the time interval before a 
signal is sent to a wireless device in sleep mode indicating 
that a data packet is awaiting delivery. The default value is 
three milliseconds. 

•  Beacon Interval:  Beacon Interval is the time between one 

DTIM and the next. The default value is 100 milliseconds. 

Lower the Beacon Interval value for an unstable wireless 

connection or for roaming devices. 

•  Enable TX Bursting:  Enable TX Bursting improves 

transmission speed between the xDSL modem router and 

802.11g devices.

•  Enable Packet Aggregation:  The default value is enabling 

the process of joining multiple packets together into a single 

transmission unit.

•  Enable WMM APSD:  Enable WMM APSD (Wi-Fi Multimedia 

Automatic Power Save Delivery) to improve power 

management between wireless devices. Select Disable to 

switch off WMM APSD.