ASUS RS700-E8-RS4 V2 Guia Do Utilizador

2-17

ASUS RS700-E8-RS4 V2

5. 

Install the riser card bracket and the PCIE expansion card assembly into the PCIE 

connector on the motherboard. Ensure that the golden connectors of the riser card 

bracket is firmly seated in place.

To install a PCI-E x8 (Gen3 x8 link), proprietary card to the PCIE x8 slot:

The pre-installed butterfly riser card bracket on the PCIE2 slot has one PCIE x8 slot and one

PCIE x16 slot. Although the PCIE x16 slot is physically longer than the PCIE x8 slot, both of 

these slots provide x8 Gen3 links.

1.

Remove the three screws that secure the butterfly riser card bracket to the chassis.

2.

Carefully remove the butterfly riser card bracket.

The PCIE x8 slot supports proprietary cards such as ASUS PIKE II series cards. Install

your proprietary cards into this slot to maximize its use.