EXSYS EX-3465 Folheto

Página de 1
 
S
e
ri
a
l-
A
T
A
 2
 
EX-3465 
      Umschalter von 1 SATA auf 4 SATA Festplatten 
Beschreibung : 
Der EX-3465 1-zu-4 Umschalter ist entwickelt worden um bis zu 4 SATA II Festplatten an einen S-ATA II Anschluss vom Motherboard anzu-
schliessen. Es kann immer nur mit einer Festplatte gearbeitet werden. Durch den Druckschalter werden die anderen S-ATA II Festplatten 
vom der Datenleitung und Stromanschluss getrennt und sparen somit Stromkosten. Der Umschalter gibt Ihnen einen Schutz gegen Virus und 
löschen von Dateien. Optimal um mehrere Betriebssysteme über ein Computer System zu starten. Der EX-3465 ist mit einem Schlüssel 
ausgestattet, damit unbefugte Personen keinen Zugriff auf Ihre Festplatten haben und somit den PC auch nicht starten können
.  
!! ACHTUNG !! Die Umschaltung der Festplatten, bei laufendem Betrieb des Rechners, geht nur mit Motherboards die  Hot Plug and Play 
Chips eingebaut haben z.B. Silicon Image 3132. Mit unseren Controller EX-3500 oder EX-3501 funktioniert der Umschalter einwandfrei.  
Merkmale : 
Umschalter mit 1 Upstream zu 4 Downstream SATA II oder SAS Ports 
3.5  oder 5.25  Front Bay Einschub für eine einfache Installation in Ihrem Computer System 
Eingebauter High Speed SATA II Signal Switch 
Speichert die  Einstellung der zu bootenden Festplatte im eingebauten EEPROM 
Schlüssel für unbefugte Zugriffe auf die Festplatten, LED Anzeige der arbeitenden Festplatte 
Kompletter Kabelsatz für 4 SATA II Festplatten werden mitgeliefert 
Chip-Set : 
Silicon Image SIL-3726 
Datentransfer-Rate : 
Bis 1.5Gb/s oder 3.0GB/s 
Anschlüsse : 
1 x 7 Pin SATA Anschluss vom Motherboard und 4 x 7 Pin SATA Anschluss zu den Festplatten 
1 x Power Anschluss vom Gehäuse Netzteil und 4 x Power Anschluss zu den Festplatten 
Hardwaresysteme : 
1 x S-ATA Motherboard Anschluss, 1 x Netzteil Anschluss 
Abmessung / Gewicht : 
87 x 67 mm / 600g 
Lieferumfang : 
EX-3465, 4 x S-ATA Kabelsatz, 5.25  Rahmen, Handbuch 
Arbeitstemperatur : 
Luftfeuchtigkeit : 
0 bis 55
0
5 bis 95% 
1-to-4 SATA II and SAS Switch 3.5-inch Bay 
Description: 
The EX-3465 1-to-4 SATA II Switch is designed to provide a high performance link between a single SATA II host port and 4 SATA de-
vices ports. It connects the host upstream port to one of the 4 downstream SATA or SAS devices (one device at the same time). It is 
done by simply pressing the push button switch. It only allowed the selected device to be powered and cut off the powers of the other 
unselected devices. This will reduce the power consumption and make sure those devices are true off line to prevent from any accidental 
erasing data by virus or application software. The EX-3465 provides a keylock switch to prevent from any unauthorized changing the 
settings. It helps home of school users to manage the devices easily. 
!! Attention !! The switching of hard disk during the operation, work only when the Motherboard include Chip-Set what support  Hot 
Plug and Play  for example Silicon Image 3132. With our controller EX-3500 or EX-3501 the S-ATA II switch works fine.  
Feature :  
Switch with 1 Upstream to 4 Downstream SATA II or SAS ports 
3.5 or 5.25-inch Bay Form Factor, Easy to Fit in Normal PC Systems 
Built-in High Speed SATA II Signal Switch, save the Current Settings by Built-in EEPROM 
Keylock to Prevent from Unauthorized Changing 
Provides LEDs to Indicate the Active Drive 
Completed cable set fort 4 SATA II or SAS drives will be included 
Connectors : 
1 Host and 4 Device 7 pin SATA II Connectors 
1 Input and 4 Output Power Connectors 
Hardware system : 
1 x S-ATA Motherboard Connector, 1 x Power Connector 
Size / Weight : 
87 x 67 mm / 600g 
Packaging contents : 
EX-3465, 4 x S-ATA cable set, 5.25-inch frame, Manual 
Chip-Set : 
Silicon Image SIL-3726 
Data transfer rate : 
Up to 1.5Gb/s and 3.0Gb/s 
Operating Temperature : 
Operating Humidity : 
0 up to 55
0
5 up to 95% 
 
Anwendung/Application : 
 
Operating System (OS):  
Geprüft/Approved: 
Verpackung/Packing:  
New
 
Motherboard 
S-ATA
 II 
EX-3500  oder/or  EX-3501 
S-A
TA I