ASUS RAMPAGE V EXTREME/U3.1 Folheto

ASUS RAMPAGE V EXTREME

3-59

The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also 

allows you to copy the current BIOS file so that you can use it as a backup when the BIOS 

fails or gets corrupted during the update process.

The succeeding utility screens are for reference only. The actual utility screen displays may 

not be same as shown.

1. 

Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and 

single partition.

2. 

Download the latest BIOS file and BIOS Updater from the ASUS website at  

http://support.asus.com and save them on the USB flash drive.

• 

NTFS is not supported in the DOS environment. Do not save the BIOS file and BIOS 

Updater to a hard disk drive or USB flash drive in NTFS format.

• 

Do not save the BIOS file to a floppy disk due to low disk capacity.

3. 

Turn off the computer and disconnect all SATA hard disk drives (optional).

1. 

Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.

2.   Boot your computer then press <F8> to launch the select boot device screen.

3. 

When the select boot device screen appears, insert the Support DVD into the optical 

drive then select the optical drive as the boot device.

E1:  ASUS DVD-E818A6T  (4069MB)

 USB DISK 2.0 (3824MB)

UEFI: (FAT)  USB DISK 2.0 (3824MB)

Enter Setup



 and  to move selection 

ENTER to select boot device

ESC to boot using defaults