Kenwood HM220 Manual De Instruções
to use your handmixer
1 Insert the beaters– turn and push.
(To remove them, press the beater
release button.)
release button.)
2 Plug in.
3 Push the speed switch forward.
3 Push the speed switch forward.
●
As the mixture thickens, increase
the speed.
the speed.
●
If the machine labours increase the
speed.
speed.
4 When the mixture has reached the
desired consistency, return the
speed switch to the off position,
then lift the beaters out of the
bowl.
speed switch to the off position,
then lift the beaters out of the
bowl.
5 Unplug.
cleaning
●
Always switch off, unplug and
remove the beaters before
cleaning.
remove the beaters before
cleaning.
●
Never put the handmixer body in
water or let the cord or plug get
wet.
water or let the cord or plug get
wet.
beaters
●
Wash by hand or in your
dishwasher, then dry.
handmixer body
dishwasher, then dry.
handmixer body
●
Wipe with a damp cloth, then dry.
storage
see illustration
1 Wrap the cord around the base of
the handmixer. Then clip the cord
together with the cable tidy.
together with the cable tidy.
2 Push the grip clip into the sockets.
Then clip in the beaters.
service and customer
care
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
If you need help with:
●
using your handmixer
●
servicing or repairs (in or out of
guarantee)
guarantee)
콯 call Kenwood Customer Care on
023 9239 2333. Have your
model number ready - it is
located on the underside of your
handmixer.
model number ready - it is
located on the underside of your
handmixer.
●
spares and attachments
콯 call 0870 2413653.
other countries
●
Contact the shop where you
bought your handmixer.
bought your handmixer.
●
Designed and engineered by
Kenwood in the UK.
Kenwood in the UK.
●
Made in China.
before using your Kenwood
appliance
●
Read these instructions carefully
and retain for future reference.
and retain for future reference.
●
Remove all packaging and any
labels.
labels.
safety
●
Never put the handmixer body in
water or let the cord or plug get
wet.
water or let the cord or plug get
wet.
●
Keep fingers, hair, clothing and
utensils away from moving parts.
utensils away from moving parts.
●
Never let the cord touch hot
surfaces or hang down where a
child could grab it.
surfaces or hang down where a
child could grab it.
●
Ensure the cord is fully unwound
before using the handmixer.
before using the handmixer.
●
Always unplug the appliance when
not in use, before fitting or
removing parts or before cleaning.
not in use, before fitting or
removing parts or before cleaning.
●
Never use a damaged handmixer.
Get it checked or repaired: see
'service and customer care'.
Get it checked or repaired: see
'service and customer care'.
●
Never use an unauthorised
attachment.
attachment.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
●
Children should be supervised to
ensure that they do not play with
the appliance.
ensure that they do not play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your handmixer.
the same as the one shown on the
underside of your handmixer.
Important – UK only
●
The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
as follows:
Blue = Neutral, Brown = Live.
●
The appliance must be protected
by a 3A approved (BS1362) fuse.
Note:
by a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using your handmixer
for the first time
1 Wash the beaters: see 'cleaning'.
know your Kenwood
handmixer
handmixer
see illustrations
햲 speed switch
햳 beater release button
햴 beaters
햵 grip clip
햶 cable tidy
햳 beater release button
햴 beaters
햵 grip clip
햶 cable tidy
햲
햶
햳
햴
햵