Nikon KeyMission 360 Guia De Configuração Rápida

Using the Camera

Before shooting, check the orientation of the camera (the side with the Nikon logo is 
the front).

• Your hands will appear in images during hand-held photography because this 

camera captures 360° content. To reduce the appearance of hands, use the base 
adapter (

A27) to stabilize the camera and shoot.

• The camera may be unable to capture subjects within about 60 cm (2 ft) from the 

camera’s top, bottom, or sides because the subjects are outside the angle of view 
(i.e., the area visible in the frame). Point the lens toward important subjects when 
shooting.

• If stains such as fingerprints are on the lens protector or underwater lens protector, 

they will appear in the images or make images look fogged. Wipe off the stains 
with a soft dry cloth before shooting.

Press the movie button or photo 
button.

• Pressing the movie button or photo button when 

the camera is off automatically turns on the 
camera and shooting begins.

• The status lamps light red at the same time while 

recording movies. To end movie recording, press 
the movie button again.

• When the photo button is pressed, the shutter 

sound is produced. When Self-timer is set to 2 s 
or 10 s, the camera beeps to indicate that the 
self-timer is activated, and then the shutter sound 
is produced. The status lamps flash green at the 
same time while the still image is being saved.

• You can change the volume of sounds during operation using the SnapBridge 360/

170 app.

Status lamps