Canon imagePROGRAF iPF9400S Manual
Paper Detailed Settings Dialog Box
Paper Detailed Settings Dialog Box
In the Paper Detailed Settings dialog box, you can set Drying Time for the paper selected with Media Type of the
Main sheet, etc.
You can display this dialog box by clicking Settings of Media Type on the Main sheet. (Refer to "
Main sheet, etc.
You can display this dialog box by clicking Settings of Media Type on the Main sheet. (Refer to "
".)
As for the items for which you can selectPrinter Default in this dialog box, you also can set them from the control pan-
el of the printer. (Refer to "
el of the printer. (Refer to "
".)
A
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
•
B
Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required
for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting
Mode is set to Automatic.
for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting
Mode is set to Automatic.
Setting Item
Details
Printer Default
The setting of the control panel of the printer is applied.
Off
Paper is ejected immediately after printing completes.
30 sec. / 1 min. / 3 min. / 5 min. / 10
min. / 30 min. / 60 min.
min. / 30 min. / 60 min.
Paper is ejected when the set time elapses after printing completes.
•
C
Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding or
color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless
printing.
color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless
printing.
Setting Item
Details
Printer Default
The setting of the control panel of the printer is applied.
Off
The next line is printed immediately after a line is printed.
1 sec. / 3 sec. / 5 sec. / 7 sec. / 9 sec.
The next line is printed when the set time elapses after a line is printed.
* Increase the time according to the occurrence condition of bleeding or unevenness.
D
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.
firmly against the Platen.
•
E
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
Paper Detailed Settings Dialog Box (Windows)
iPF9400S
Windows Software
Printer Driver
192