Canon VB-H630D Manual
[Event] Setting Video Record, Volume Detection, External Device Output/Input, Audio Playback and Timer
73
S
et
ting Page
4
(2) [Operation Mode]
Select the circuit condition of the connected external
device.
When [Normally Open] is selected, an active event
occurs when the terminals of the external device
close, and an inactive event occurs when the
terminals open.
When [Normally Close] is selected, an active event
occurs when the terminals of the external device
open, and an inactive event occurs when the
terminals close.
(3) [Active Event Operation]
Select the operation to be performed upon an active
event. If [Enable] is selected, (6) [Preset], (7) [Video
Record] and (8) [E-mail Notification] will be executed
according to their settings upon an active event.
(4) [Inactive Event Operation]
Select the operation to be performed upon an inactive
event. If [Enable] is selected, (6) [Preset], (7) [Video
Record] and (8) [E-mail Notification] will be executed
according to their settings upon an inactive event.
(5) [Ongoing Active Event Operation]
Select the operation to be performed while an active
event is ongoing. This can only be set when [Active
Event Operation] is set to [Enable].
Select [Enable] to perform operations according to
the (7) [Video Record] and (8) [E-mail Notification]
settings during an ongoing active event.
(6) [Preset]
If a preset is specified, the camera will automatically
orient to the specified preset position when an
external device input event occurs. To use presets, it
is necessary to set presets with the Preset Setting Tool
under Admin Tools (p. 106). If there is no need for
additional camera operation, select [None].
(7) [Video Record]
Specify the video record action. If [Enable] is
selected, video will be transmitted to the destination
selected in [Video Record Action] (p. 71) when an
external device input event occurs.
(8) [E-mail Notification]
Select the e-mail notification operation to be
performed. If [Enable] is selected, e-mail
notification will be performed when an external
device input event occurs. To use this function,
[Upload] > [E-mail Notification] must also be set
(9) [External Device Output for Active Event]
Select whether external device output (1 or 2) is active
or inactive upon an active event. Select [Disable] to
disable external device output.
(10)[External Device Output for Inactive Event]
Select whether external device output (1 or 2) is active
or inactive upon an inactive event. Select [Disable] to
disable external device output.
(11)[Audio Playback at Active Event]
Select the audio playback operation to be performed
upon an active event. If [Enable] is selected, the audio
designated in [Sound Clip] will playback when the
external device input becomes active.
(12)[Audio Playback at Inactive Event]
Select the audio playback operation to be performed
upon an inactive event. If [Enable] is selected, the
audio designated in [Sound Clip] will playback when
the external device input becomes inactive.
(13)[Sound Clip]
Select the sound clip to be played. For registration of
sound clips, see p. 74.
(14)[Volume]
Select the volume of sound clips using an integer of 1
to 100. The greater the value, the louder the volume
becomes.
(15)[Day/Night Mode Switching]
Select the Day/Night Mode switching behavior when
an external device input event is triggered.
When [Switch to Day Mode] is selected, switches to
Day Mode when an active event is triggered, and
switches to Night Mode when an inactive event is
triggered.
When [Switch to Night Mode] is selected, switches to
Night Mode when an active event is triggered, and
switches to Day Mode when an inactive event is
triggered.
Select [Disable] to disable Day/Night Mode switching.
Timer
Important
• When [Day/Night] in the Admin Viewer is set to [Auto], Day/
Night Mode switching will not happen when an external
device input event is triggered (p. 155).
device input event is triggered (p. 155).
• Camera control privileges are released if any of the following
actions occur while the Admin Viewer/VB Viewer has camera
control privileges.
–
If the camera angle is moved according to
the [Preset] settings
– If the Day/Night Mode is switched using [Day/Night Mode
Switching].