Canon imagePROGRAF iPF830 Manual

Turning the printer off

Important

Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.

 

Make sure no print jobs are in progress.
If the Message Lamp is flashing, check the message on
the Display Screen and take action as necessary.  (See "

If the Data Lamp is flashing, the printer is receiving a print
job. Turn off the printer only after printing is finished.

 

Hold down the Power button for more than a second.

After "Shut Down.. Please Wait.." is shown on the Display
Screen, the printer shuts off.

These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.

Note

For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide.  (See "

To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver.  (See "

Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes dirty, it
may soil the underside of paper.  (See "

 

Turn the printer on.  (See "

 

 

 

 

Loading and Printing on Rolls

                                                                                                                                                                                  

iPF830

                                                                                                                                                                                                                     

Basic Printing Workflow

Printing procedure

 

18