Canon imagePROGRAF iPF830 Manual
Printed colors of lines are inaccurate during HP-GL/2 printing
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause
Corrective Action
AdjustFaintLines is On in the Con-
trol Panel menu.
trol Panel menu.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
results. However, lines in some colors may appear broken.
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
Cause
Corrective Action
The page size of the HP-GL/2 print job, as created in the source application, is
incorrect.
incorrect.
In the Control Panel menu, set Oversize to Off.
(See "
(See "
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause
Corrective Action
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.
source application, is incorrect.
Set Conserve Paper to On in the Control Panel menu.
(See "
(See "
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Cause
Corrective Action
Large print jobs with a lot of data take longer to print.
Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
Panel menu was set to 600dpi.
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
Corrective Action
The printer is analyzing the print job.
Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
Panel menu was set to 600dpi.
iPF830
Printed colors of lines are inaccurate during HP-GL/2 printing
Troubleshooting
HP-GL/2 problems
631