Canon imageCLASS LBP251dw Manual

This explains the procedure for automatically searching for a device on a network and installing a driver

([Standard]).

Confirm that the following conditions are satisfied. Complete the preparation operations.

●

●

The device is one that is on the same subnet as the computer you are using (for TCP/IP network
environments)

●

Settings at the device (for network environments that use WSD)

- Set both [Use WSD] and [Multicast Discovery Settings] to on.
- "UFR II," or "PS3" is selected for [PDL Selection (Plug and Play)].

For details, refer to the manual of the device.

●

The device must be in the same subnet as the computer you are using.

●

●

When starting the computer, log on as a member of Administrators.

●

[Desktop] screen display (when using Windows 8/8.1/Server 2012/Server 2012 R2)

Double-click the downloaded file to decompress it. If the installer does not start automatically after it is

decompressed, double-click [Setup.exe].

(1) Set the CD-ROM in the computer → click [Installation].

(2) In the [Installation] screen, confirm the driver → click [Installation].

If the CD-ROM menu is not displayed, click "Open details."
In the following procedure, start the installer.

- When the [Tap to choose what happens with this disc.] message is displayed: Click the message → click

[Run MInst.exe].

- When the [AutoPlay] dialog box is displayed: Click [Run MInst.exe].
- When Windows Explorer is displayed: Double-click [MInst.exe].
- When nothing is displayed (Windows10): From Explorer, double-click the CD icon in [This PC] > [Devices

and drives].

- When nothing is displayed (Windows 8/8.1/Server 2012/Server 2012 R2): Click Explorer in the [Desktop]

screen → double-click the CD icon in [Computer].

- When nothing is displayed (Windows Vista/7/Server 2008/Server 2008 R2): Double-click the CD-ROM icon in

[

] (Start) > [Computer].

Installation Using the Installer

22