Canon imageCLASS MF7470 Manual

1-9

To turn the control panel on or off, press the control panel power 
switch. When turned off, the machine is in the Sleep mode.

Control Panel Power Switch

Machine Status

On

Standby mode (ready for 
immediate copying or printing)

Off

Sleep mode

The machine can receive and print documents from a personal computer 
when it is in the Sleep mode. Fax/I-fax documents can also be received 
while the machine is in the Sleep mode.
The energy consumption while the machine is in the Sleep mode can be 
set from the Additional Functions screen. (See “Common Settings,” on 
p. 11-5.)
The machine will not enter the Sleep mode if it is scanning or printing.
If there is less time than specified in Auto Sleep Time remaining before 
sending a job which has been reserved for delayed sending, the machine 
will not enter the Sleep mode completely.
If there is a job which has been reserved for delayed sending, the 
machine will not enter the Sleep mode completely.
If you are using a management application to view or manage the 
settings and status of the machine via the network, the machine may not 
enter the Sleep mode completely.

■

–

–

–
–

–

–

If you are using the machine as a Windows printer, the machine may not 
enter the Sleep mode completely if SNMP Status is enabled for your 
operating system (unless your computer is turned off ). For more 
information on disabling SNMP Status, contact your network 
administrator.
It takes approximately 10 seconds for the machine to recover after the 
Sleep mode is deactivated.
If Energy Consumption in Sleep Mode is set to [Low], it may take more 
than 10 seconds for the touch panel display to be displayed after 
pressing the control panel power switch.
The energy consumption level in the Sleep mode is [High] even when the 
energy consumption level is set to [Low], such as when a job is being 
processed (including a forwarding job, report job, receive job, or sending 
a forwarding done notice).

–

–

–

–