Canon imageCLASS MF7470 Manual

3-7

Press [Irreg. Size].
Press [X] to specify the horizontal axis of the paper, then enter a 
value.
Press [Y] to specify the vertical axis of the paper, then enter a 
value.
Press [OK].

If you make a mistake when entering values, press [C] on the 
touch panel display, then enter the correct values.
To enter values in millimeters, press [mm].
If you enter values outside the setting range, [OK] is grayed 
out and cannot be selected. Enter an appropriate value.
You can adjust values for [X] between 5 7/8" and 17", and for 
[Y] between 3 3/4" and 11 11/16".

Press [Next].

Select the desired paper type, then press [OK].

When printing on special types of paper, such as heavy paper, 
be sure to correctly set the paper type, especially if you are 
using heavy paper. If the type of paper is not set correctly, it 
could adversely affect the quality of the image. Moreover, the 
fixing unit may become dirty and require a service repair, or 
the paper could jam.
If you select [Irreg. Size] for copying, you cannot use the Rotate 
Collate, Rotate Group, 1 

▶ 2-Sided, 2 ▶ 2-Sided, Book ▶ 2-

Sided, 2-Page Separation, Image Combination mode.

●

–
–

–

–

–

–
–

–

–

–

–

–

Press [Envelope].
Select the desired envelope type, then press [OK].

If the envelope type is not selected correctly, a paper jam will 
occur.
If an envelope size is selected, the Finishing, 1 

▶ 2-Sided, 2 ▶ 

2-Sided, Book 

▶ 2-Sided, 2-Page Separation, or Image 

Combination mode cannot be specified.

Press [OK].

To cancel all settings and return the machine to the Standard mode, 
press   (Reset).

●

–
–

–

–

–