Canon imageCLASS MF7470 Manual
1
2
3
4
5
6
7
8
9
10
11
3-19
Previous
Back
Next
TOP
Before Using the
Machine
Machine
Original and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
4.
Press
[1
▶ 2-Sided].
To set the orientation of the two-sided copies:
Press [Option].
Select the type of two-sided orientation, then press [Done].
Details of each item are shown below.
Select the type of two-sided orientation, then press [Done].
Details of each item are shown below.
[Book Type]:
The front and back sides of the copy will
have the same top-bottom orientation.
have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the copy will
have opposite top-bottom orientations.
5.
Press
[OK].
6.
Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
To cancel this setting, press [2-sided] → [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
To cancel all settings and return the machine to the Standard
mode, press (Reset).
2 to 2-Sided
This feature enables you to make two-sided copies from two-sided
originals. If a two-sided original is placed in the feeder, it is
automatically turned over so that both sides of the original are
copied on the front and back sides of a copy sheet.
originals. If a two-sided original is placed in the feeder, it is
automatically turned over so that both sides of the original are
copied on the front and back sides of a copy sheet.
The 2
▶ 2-Sided mode cannot be used with the 2-page Separation or
Image Combination mode.
1.
Press (COPY).
●
–
–
–
–
–
–
■
2.
Place your originals.
3.
Press
[2-sided].
4.
Press
[2
▶ 2-Sided].
To set the orientation of the originals and the copies:
Press [Option].
Select the type of two-sided orientation for the originals and the
copies.
Details of each item are shown below.
Select the type of two-sided orientation for the originals and the
copies.
Details of each item are shown below.
Original
[Book Type]:
The front and back sides of the
original have the same top-bottom
orientation.
original have the same top-bottom
orientation.
[Calendar Type]:
The front and back sides of the
original have opposite top-bottom
orientations.
original have opposite top-bottom
orientations.
Copy
[Book Type]:
The front and back sides of the copy
will have the same top-bottom
orientation.
will have the same top-bottom
orientation.
[Calendar Type]:
The front and back sides of the
copy will have opposite top-bottom
orientations.
copy will have opposite top-bottom
orientations.
Press [Done].
5.
Press
[OK].
●
–
–
–
–