Canon Océ VarioPrint 6000+ Series Manual
Manually park the Shuttle
When to do
The error messages ‘
MANUALLY PARK SHUTTLE’ and ‘SHUTTLE NOT PARKED’ are displayed.
Illustration
B
A
[39] Shuttle Assembly Position - CORRECT
1
[40] Pick-up fingers
1
Pick-up fingers
Step
1
Open the folder cover.
See
2
Push the shuttle-assembly to the
end.
end.
The illustration above shows the correct
position for the shuttle assembly. Screw
‘A’ must be aligned with white gear ‘B’.
If the shuttle assembly does not move to
the correct position, push the pick-up fin-
gers away from each other by 2-3 mm
and try again. Repeat if necessary.
See illustration above.
position for the shuttle assembly. Screw
‘A’ must be aligned with white gear ‘B’.
If the shuttle assembly does not move to
the correct position, push the pick-up fin-
gers away from each other by 2-3 mm
and try again. Repeat if necessary.
See illustration above.
3
Wait until the error message
SHUT‐
TLE NOT PARKED is cleared from the
screen.
screen.
If the message does not clear, check that
the shuttle assembly is in the correct posi-
tion. Repeat Step 2 if necessary.
the shuttle assembly is in the correct posi-
tion. Repeat Step 2 if necessary.
4
Close the folder cover.
Manually park the Shuttle
102
Chapter 6 - Error Conditions, Problems and Solutions