Canon LASER CLASS 830i Manual
0
Install Handset (Optional)
1
Use a screwdriver to remove the cover on the right side of
the machine.
the machine.
2
Attach the screws included with the machine to the
center screw holes, and attach the driver instruction label
below.
center screw holes, and attach the driver instruction label
below.
3
Screw the handset cradle onto the bracket with the
screws (A). Make sure the groove (B) side of the cradle
faces to the left.
screws (A). Make sure the groove (B) side of the cradle
faces to the left.
4
Screw the bracket onto the machine with the screws (A).
5
Place the handset on the cradle.
If using the handset or an external telephone, make sure to set
the fax receive mode to <FaxTel> or <Manual>. For how to set
the receive mode, see “Set the Machine for Receiving Faxes,” on
p..
the fax receive mode to <FaxTel> or <Manual>. For how to set
the receive mode, see “Set the Machine for Receiving Faxes,” on
p..
6
Connect the curly cord terminal to the back of the
modular terminal.
modular terminal.
7
Connect the power cord into the wall outlet,
and turn the power on.
and turn the power on.
8
Confirm that you can hear a dial tone from the
handset.
handset.