Canon PowerShot SX420 IS Black Manual
206
ç
Contents
●
To look at a image saved on your
computer, use a software (such
as one installed on your computer
by default or general software)
that supports images shot with a
camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
(= 56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
(= 56) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
●
You can change the nickname of the camera displayed on the
screen of step 2 (= 202).
screen of step 2 (= 202).
●
When the camera is connected to a computer, the camera screen
is blank.
is blank.
●
Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
[CameraWindow] icon in the Dock.
●
To disconnect from the camera, turn off the camera.
●
If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.