Canon PRISMAdirect Manual

The print settings are retrieved from the document. You can optimize the printing process by
configuring the print settings. This topic describes the [Finishing] settings.

[Finishing]

You can overrule the defined finishing settings in the document, without
losing the original finishing settings.
• [As in document]

Print the document with the original finishing settings.

• 'No finishing'

Print the document without any finishing settings.

• [1 Edge staple]

Print the document with 1 staple, but without any fold and punch set-
tings.

• [2 Edge staples]

Print the document with 2 staples, but without any fold and punch set-
tings.

• [Corner staple]

Print the document with 1 staple in the corner, but without any fold and
punch settings.

For example, you make a test print with option [1 Edge staple]. The docu-
ment is printed with 1 staple, but without any fold and punch settings. Then
you select option [As in document] and print again. The document is printed
with the original finishing settings as defined in the application.

[Feed edge]

The paper can be fed into the printer with the long edge or the short edge.
This depends how the paper is loaded in the paper tray.
• [Printer default]

Use paper from the default paper tray of the printer.

• [Short edge]

Use paper from a paper tray where the [Feed edge] is [Short edge].

• [Long edge]

Use paper from a paper tray where the [Feed edge] is [Long edge].

[Trimming mode] • [Off]

• [From]

Only the front edge of the page is cut. Use the [Finishing size] option to
define the page size after trimming. The drop-down list contains prede-
fined page sizes, e.g. A4. Or you can select the [Custom] value to define
the width of the page yourself.

• [Front, top, bottom]

The front edge and the top and bottom of the page are cut. Use the [Fin-
ishing size] option to define the page size after trimming. The drop-down
list contains predefined page sizes, e.g. A4. Or you can select the [Cus-
tom] value to define the width and the height of the page yourself. You
can also define the [Bottom offset].

4

PRISMAdirect v1.2