Canon LASER CLASS 830i Manual

System Manager Sett

ngs

9-2

When you use Department ID Management, you need to set both the System Manager ID and password 
to restrct the access to the <SYSTEM SETTINGS> menu from the operaton panel, or usng the Remote UI. 
Otherwse, all users wll be consdered as System Manager, and anyone can access the <SYSTEM SETTINGS> 
menu from the operaton panel, or use the Remote UI wthout restrcton.
You can enter a maxmum of 32 characters for the System Manager’s name.
The maxmum number of dgts that you can store for the System Manager ID and System Password s seven. 
If you enter fewer than seven dgts for ether settng, the machne stores them wth leadng zeros. 
Example: If <321> s entered, <0000321> s stored.
You cannot store a System Manager ID wth only zeros as the number, such as <0000000>. If you enter a 
number that begns wth zeros, the leadng zeros are gnored. 
Example: If <02> or <002> s entered, <0000002> s stored.
To delete nformaton that has been entered, press and hold down [Clear] 

→ enter the correct number.

If the System Manager ID and System Password have been set, enter the System Manager ID and System 
Password usng the numerc keys, then press [Log In/Out (ID)].

–

–
–

–

–