Canon LASER CLASS 830i Manual
Ma
ntenance
10-6
Fuser Roller
If black spots appear wth prntng, the fuser
roller n the man unt may be drty.
Should ths occur, clean the fusng roller
n the followng procedure. The roller
should also be cleaned each tme the toner
cartrdge s replaced. Load a sheet of blank
LTR paper nto the mult-purpose tray and
start cleanng.
roller n the man unt may be drty.
Should ths occur, clean the fusng roller
n the followng procedure. The roller
should also be cleaned each tme the toner
cartrdge s replaced. Load a sheet of blank
LTR paper nto the mult-purpose tray and
start cleanng.
Cleanng the roller takes approxmately 130
seconds.
When some jobs are stored n memory, ths
functon s not avalable.
seconds.
When some jobs are stored n memory, ths
functon s not avalable.
1
Press [Additional Functions].
2
Press [
] or [
] to select
<ADJUST./CLEANING>, then press
[OK].
[OK].
3
Open the multi-purpose tray.
–
–
4
Pull out the multi-purpose tray
extension until it clicks, then open
it.
extension until it clicks, then open
it.
5
Load a sheet of blank LTR paper.
6
Press [
] or [
] to select <FIX.
UNIT CLEANING>, then press [OK].
Cleanng starts. When fnshed, press [Stop] to
return to the standby mode.
return to the standby mode.
Use standard paper as the cleanng paper.
Throw away the cleanng paper after use.
Throw away the cleanng paper after use.
7
Press [
] to select <YES>.
Cleanng starts. When fnshed, the dsplay
returns to standby mode.
To not perform cleanng press [
returns to standby mode.
To not perform cleanng press [
] to select
<NO>.
Use standard paper as the cleanng paper.
Throw away the cleanng paper after use.
Throw away the cleanng paper after use.
–
–
–
–
–
–