Canon CXDI-401G COMPACT Digital Radiography System Brochura

CANON MEDICAL SYSTEMS

A Division of Canon U.S.A., Inc.

15955 Alton Parkway

Irvine, CA 92618-3616, U.S.A

Telephone: (800)970-7227, (949)753-4160

Fax: (949)753-4164

Email: drsales@cusa.canon.com

Website: www.usa.canon.com/DR

DRB-016 Rev. B 

 

*  Compared to all other Digital Radiography Detectors as of August 5, 2011.

CANON, CXDI and LANMIT are registered trademarks of Canon Inc. in the United States and may also  

be registered trademarks or trademarks of other countries. RadPRO is a registered trademark of Virtual  

Imaging, Inc., a Canon U.S.A. company, in the United States.  DICOM is a registered trademark of the  

National Electrical Manufacturer’s Association for its standards publications relating to digital  

communications of medical information. All other referenced marks are trademarks of their  

respective owners and are hereby acknowledged. Specifications are subject to change without notice. 

© 2011 Canon U.S.A., Inc

The Canon CXDI-401 COMPACT Series  

DR Detectors incorporate a proprietary developed 

glass substrate and advanced LANMIT

®

 (Large Area 

New Metal-Insulator Semiconductor) technology.  

In addition, the CXDI-401C COMPACT DR Detector 

features a Canon manufactured CsI scintillator 

for superb dose efficiency.  The highly sensitive detector 

delivers clear diagnostic images while providing lower 

X-ray exposure to the patient.

The CXDI-401 COMPACT Series DR Detectors can 

easily be integrated with your radiography workflow, 

enhancing your Digital Radiography capabilities well 

into the future.

Scintillator

Purpose

General Radiography

Method

Flat panel detector: scintillator & amorphous silicon (a-Si)

Sensor

LANMIT (Large Area New-MIS sensor and TFT)

Pixels

3,320 x 3,408 pixels (11.3 megapixels)

A/D

14-bit

Grayscale

4,096 grayscale (12-bit)

High Resolution Image  

Display Time

Approx. 5 seconds after X-ray exposure

Cycle Time

Approx. 15 seconds after X-ray exposure

DICOM

®

DICOM 3.0 compatible, Print Management Service Class (SCU), 

Storage Service Class (SCU), and others

Voltage

AC 100 - 240 V 50/60 Hz

Operating Environment

Sensor unit: 41 - 95°F (5 - 35°C), Humidity 30 - 80% RH (non-condensing)

Standard Components

Sensor unit, power box, status indicator, X-ray interface cable

Dimensions (L x W x D)

Sensor unit: 18.1 x 18.1 (+1.2) x 0.6 in  (460 x 460 (+30) x 15mm)

Weight

15.4 lbs (7 kg)

INCHES

MEGAPIXELS

MICRONS

SECONDS