Canon CR-2 AF Digital Non-Mydriatic Retinal Camera Manual
12
2 Safety
CAUTION
Keep the forehead rest and chin rest clean.
To prevent the risk of infection, wipe the forehead rest with disinfectant ethanol for
each patient. To ensure cleanliness, replace the chin rest paper for each patient.
If the chin rest paper is not being used, be sure to disinfect the chin rest for each
patient.
For details on how to disinfect, consult a specialist. The forehead rest may be
corroded if a disinfectant other than those above is used.
each patient. To ensure cleanliness, replace the chin rest paper for each patient.
If the chin rest paper is not being used, be sure to disinfect the chin rest for each
patient.
For details on how to disinfect, consult a specialist. The forehead rest may be
corroded if a disinfectant other than those above is used.
Slowly move the main unit toward the patient’s eye when
taking an image.
When adjusting the position of the main unit in the front-back direction, slowly bring
the main unit closer to the patient while looking at the patient’s eye from the side.
The patient’s eye may be injured if the objective lens makes contact with it.
the main unit closer to the patient while looking at the patient’s eye from the side.
The patient’s eye may be injured if the objective lens makes contact with it.
Check the image before using the CR-2 AF.
Before using the CR-2 AF, be sure to take a test image to ensure that there is no
foreign matter present that can affect image readings or diagnosis.
foreign matter present that can affect image readings or diagnosis.
Be sure to turn off the power when not in use.
For safety reasons, be sure to turn off the power of all the devices when the CR-2
AF is not being used.
Also, unplug the power plug from the AC outlet and put on the cover when the CR-2
AF is not going to be used for a long time.
Otherwise, dust or any foreign matter may accumulate and result in fire.
AF is not being used.
Also, unplug the power plug from the AC outlet and put on the cover when the CR-2
AF is not going to be used for a long time.
Otherwise, dust or any foreign matter may accumulate and result in fire.
CAUTION
Prohibited
Do not touch the main unit while it is moving.
The main unit moves to the center position when the CR-2 AF main unit is turned on
or an examination is finished with the control software. Do not touch the main unit
while it is moving.
or an examination is finished with the control software. Do not touch the main unit
while it is moving.
Before packing the CR-2 AF, return the main unit and chin
rest to their lowest positions.
Lower the main unit and chin rest to the bottom. To automatically lower them, turn
on the power while holding down the SET button.
on the power while holding down the SET button.
Inspect daily and periodically.
For safety reasons, before using the CR-2 AF, be sure to perform the daily
inspection.
Have a periodically inspection performed for the CR-2 AF at least once a year by a
Canon designated representative to maintain its performance and reliability.
inspection.
Have a periodically inspection performed for the CR-2 AF at least once a year by a
Canon designated representative to maintain its performance and reliability.
Prohibited
Do not turn off the CR-2 AF, the digital camera, or the
computer during image capture, data transfer, or backup.
Doing so might damage the computer or corrupt the data.
Prohibited
Do not disconnect the cable between the CR-2 AF and the
computer during image capture or data transfer.
Doing so might damage the computer or corrupt the data.
L-IE-5208A_CR-2_AF.indb 12
2015/02/13 11:33:37