Canon EOS-1D X Manual

111

You can trim only the part of an image you need, or change the 
composition of an image where an image shot horizontally becomes 
vertical. You can also adjust the angle of an image before trimming. If 
you select [Circle] for [Aspect ratio], the area outside the specified range 
will only be masked in black and the image will not be trimmed.



Click the [Trimming Angle] button.



The trimming/angle adjustment window appears.



Editing can be done once the image is displayed clearly in the 
trimming/angle adjustment window.



If you click [Center on Screen], you can display the trimming 
range in the center of the window.



If you click the [OK] button after adjusting only the angle of the 
image, the image will be trimmed at the largest possible trimming 
range.

When aspect ratio information is attached to an image shot with the 
EOS-1D X, EOS-1D Mark IV, EOS-1Ds Mark III, EOS-1D Mark III, 
EOS 5D Mark III, EOS 7D, EOS 60D, EOS REBEL T4i/650D or 
EOS REBEL T3i/600D, the trimming range based on the aspect 
ratio information is displayed.

Use the mouse (click /) to adjust the angle or 
directly enter the adjustment angle

*

 (0.01-degree 

increments; adjustable range: -45 to +45 degrees)

Click (rotate 
image left 
or right in 
90-degree 
increments)

Drag

*

 (0.01-degree increments; 

adjustment range: -45 to +45 degrees)

Largest 
possible 
trimming 
range

*

You cannot adjust the angle of images that exceed 9999 x 6666 
pixels in size.

COP

Y