Canon EOS-1D X Manual
12
This section’s explanation follows the flow of the connection
instructions. If an error is displayed, see “Troubleshooting” in Chapter 8
(p.83) and check the settings.
instructions. If an error is displayed, see “Troubleshooting” in Chapter 8
(p.83) and check the settings.
Pressing the shutter button or other camera controls during
configuration will cause the connection instructions to close. Do not
press the shutter button or other controls until configuration is
finished.
configuration will cause the connection instructions to close. Do not
press the shutter button or other controls until configuration is
finished.
On the [52] tab, set [Auto power off] to [Disable]. If auto power off
is activated, the connection instructions will close during the
configuration process.
is activated, the connection instructions will close during the
configuration process.
1
Turn the camera on.
2
Display the communication
functions menu.
functions menu.
On the camera, press the <7>
button.
button.
On the [53] tab, select
[Communication settings] and
press <0>.
[Communication settings] and
press <0>.
3
Select [Communication func].
Set [Communication func] to
[Enable], and then press <0>.
[Enable], and then press <0>.
X
[Network settings] is now available.
4
Select [Network settings].
Displaying the Connection Wizard