QLogic 7104-9M-CABLE Manual Do Utilizador
A–Installation Troubleshooting
BIOS Settings
BIOS Settings
A-2
IB0056101-00 H
S
BIOS Settings
This section covers issues related to BIOS settings. You can check and adjust
BIOS settings using the BIOS Setup utility. For specific instructions, follow the
hardware documentation that came with your system.
BIOS settings using the BIOS Setup utility. For specific instructions, follow the
hardware documentation that came with your system.
Enable Advanced Configuration and Power Interface (ACPI)
This setting must be enabled. If ACPI is disabled, it may cause initialization
problems, as described in the Troubleshooting section of the QLogic Host
Channel Adapter and QLogic OFED Software Users Guide.
problems, as described in the Troubleshooting section of the QLogic Host
Channel Adapter and QLogic OFED Software Users Guide.
Issue with Supermicro
®
H8DCE-HTe and the QHT7040
The QLogic adapter may not be recognized at startup when using the Supermicro
H8DCE-HT-e and the QHT7040 adapter. To fix this problem, set the operating
system selector option in the BIOS for Linux. The option will look like:
H8DCE-HT-e and the QHT7040 adapter. To fix this problem, set the operating
system selector option in the BIOS for Linux. The option will look like:
OS Installation [Linux]
Software Installation Issues
Some problems can be found by running ipath_checkout. Run
ipath_checkout before contacting technical support.
ipath_checkout before contacting technical support.
Missing Kernel RPM Errors
Install the kernel-source, kernel-devel, and, if using an older release,
kernel-smp-devel RPMs for your distribution before installing the InfiniPath
kernel-smp-devel RPMs for your distribution before installing the InfiniPath
RPMs, as there are dependencies.
lists all the required
packages.
Use the uname -a command to find out which kernel is currently running, to
make sure that you install the version with which it matches.
If these RPMs have not been installed, you will see error messages like this when
installing InfiniPath:
installing InfiniPath:
Building and installing InfiniPath modules for 2.6.16_sles10
2.6.16.21-0.8-debug kernel
*** ERROR: /lib/modules/2.6.16.21-0.8-debug/build/.config is
missing.
*** Is the kernel-source rpm for 2.6.16.21-0.8-debug
installed?
================
2.6.16.21-0.8-debug kernel
*** ERROR: /lib/modules/2.6.16.21-0.8-debug/build/.config is
missing.
*** Is the kernel-source rpm for 2.6.16.21-0.8-debug
installed?
================
================