Olympus fe-320 Manual Do Utilizador

Usi

ng OLYMPUS Mast

Make sure the camera is turned off.

• The monitor is off.
• The lens is retracted.

Connect the multi-connector on the camera to the
USB port on the computer using the provided USB
cable.

• Refer to your computer’s instruction manual to locate the position

of the USB port.

• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB

connection is displayed.

Select [PC], and press

.

The camera is recognized by the computer.

• Windows

When you connect the camera to your computer for the first time,
the computer attempts to recognize the camera. Click “OK” to exit the message that is
displayed. The camera is recognized as a “Removable Disk”.

• Macintosh

The iPhoto program is the default application for managing digital images. When you connect
your digital camera for the first time, the iPhoto application starts automatically, so close this
application and start OLYMPUS Master.

Note

• The camera functions are disabled while the camera is connected to a computer.
• Connecting the camera to a computer via a USB hub may cause unstable operation. In this

case, do not use a hub, but connect the camera directly to the computer.

• Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in

Step 3, Y is pressed and [MTP] is selected.

Connecting the camera to a computer

Monitor

Multi-connector

FE-340/X-855/C-560

FE-320/X-835/C-540

Connector
cover

U S B

P C

EASY PRINT

CUSTOM PRINT

EXIT

SET